| Event Name | Description | Additional Info |
|---|---|---|
| CORE | ||
| INST_RETIRED.ANY | Counts the number of instructions that retire execution. For instructions that consist of multiple uops, this event counts the retirement of the last uop of the instruction. The counter continues counting during hardware interrupts, traps, and inside interrupt handlers. This event uses fixed counter 0. You cannot collect a PEBs record for this event. | IA32_FIXED_CTR0 Architectural, Fixed |
| CPU_CLK_UNHALTED.CORE | Counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. This event uses fixed counter 1. You cannot collect a PEBs record for this event. | IA32_FIXED_CTR1 Architectural, Fixed |
| CPU_CLK_UNHALTED.REF_TSC | Counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time. This event is not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. This event uses fixed counter 2. You cannot collect a PEBs record for this event. | IA32_FIXED_CTR2 Architectural, Fixed |
| BR_INST_RETIRED.ALL_BRANCHES | Counts branch instructions retired for all branch types. This is an architectural performance event. | EventSel=C4H UMask=00H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] Architectural |
| BR_MISP_RETIRED.ALL_BRANCHES | Counts mispredicted branch instructions retired including all branch types. | EventSel=C5H UMask=00H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] Architectural |
| CPU_CLK_UNHALTED.CORE_P | Core cycles when core is not halted. This event uses a (_P)rogrammable general purpose performance counter. | EventSel=3CH UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] Architectural |
| CPU_CLK_UNHALTED.REF | Reference cycles when core is not halted. This event uses a programmable general purpose performance counter. | EventSel=3CH UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] Architectural |
| INST_RETIRED.ANY_P | Counts the number of instructions that retire execution. For instructions that consist of multiple uops, this event counts the retirement of the last uop of the instruction. The event continues counting during hardware interrupts, traps, and inside interrupt handlers. This is an architectural performance event. This event uses a (_P)rogrammable general purpose performance counter. *This event is Precise Event capable: The EventingRIP field in the PEBS record is precise to the address of the instruction which caused the event. Note: Because PEBS records can be collected only on IA32_PMC0, only one event can use the PEBS facility at a time. | EventSel=C0H UMask=00H Counter=0,1,2,3 PEBS:[Precise, Counter=0] Architectural |
| LONGEST_LAT_CACHE.MISS | Counts memory requests originating from the core that miss in the L2 cache. | EventSel=2EH UMask=41H Counter=0,1,2,3 PEBS:[Counter=0] Architectural |
| LONGEST_LAT_CACHE.REFERENCE | Counts memory requests originating from the core that reference a cache line in the L2 cache. | EventSel=2EH UMask=4FH Counter=0,1,2,3 PEBS:[Counter=0] Architectural |
| BACLEARS.ALL | Counts the number of times a BACLEAR is signaled for any reason, including, but not limited to indirect branch/call, Jcc (Jump on Conditional Code/Jump if Condition is Met) branch, unconditional branch/call, and returns. | EventSel=E6H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| BACLEARS.COND | Counts BACLEARS on Jcc (Jump on Conditional Code/Jump if Condition is Met) branches. | EventSel=E6H UMask=10H Counter=0,1,2,3 PEBS:[Counter=0] |
| BACLEARS.RETURN | Counts BACLEARS on return instructions. | EventSel=E6H UMask=08H Counter=0,1,2,3 PEBS:[Counter=0] |
| BR_INST_RETIRED.ALL_TAKEN_BRANCHES | Counts the number of taken branch instructions retired. | EventSel=C4H UMask=80H Counter=0,1,2,3 PEBS:[Precise, Counter=0] |
| BR_INST_RETIRED.CALL | Counts near CALL branch instructions retired. | EventSel=C4H UMask=F9H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.FAR_BRANCH | Counts far branch instructions retired. This includes far jump, far call and return, and Interrupt call and return. | EventSel=C4H UMask=BFH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.IND_CALL | Counts near indirect CALL branch instructions retired. | EventSel=C4H UMask=FBH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.JCC | Counts retired Jcc (Jump on Conditional Code/Jump if Condition is Met) branch instructions retired, including both when the branch was taken and when it was not taken. | EventSel=C4H UMask=7EH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.NON_RETURN_IND | Counts near indirect call or near indirect jmp branch instructions retired. | EventSel=C4H UMask=EBH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.REL_CALL | Counts near relative CALL branch instructions retired. | EventSel=C4H UMask=FDH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.RETURN | Counts near return branch instructions retired. | EventSel=C4H UMask=F7H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_INST_RETIRED.TAKEN_JCC | Counts Jcc (Jump on Conditional Code/Jump if Condition is Met) branch instructions retired that were taken and does not count when the Jcc branch instruction were not taken. | EventSel=C4H UMask=FEH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_MISP_RETIRED.IND_CALL | Counts mispredicted near indirect CALL branch instructions retired, where the target address taken was not what the processor predicted. | EventSel=C5H UMask=FBH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_MISP_RETIRED.JCC | Counts mispredicted retired Jcc (Jump on Conditional Code/Jump if Condition is Met) branch instructions retired, including both when the branch was supposed to be taken and when it was not supposed to be taken (but the processor predicted the opposite condition). | EventSel=C5H UMask=7EH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_MISP_RETIRED.NON_RETURN_IND | Counts mispredicted branch instructions retired that were near indirect call or near indirect jmp, where the target address taken was not what the processor predicted. | EventSel=C5H UMask=EBH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_MISP_RETIRED.RETURN | Counts mispredicted near RET branch instructions retired, where the return address taken was not what the processor predicted. | EventSel=C5H UMask=F7H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| BR_MISP_RETIRED.TAKEN_JCC | Counts mispredicted retired Jcc (Jump on Conditional Code/Jump if Condition is Met) branch instructions retired that were supposed to be taken but the processor predicted that it would not be taken. | EventSel=C5H UMask=FEH Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| CORE_REJECT_L2Q.ALL | Counts the number of demand and L1 prefetcher requests rejected by the L2Q due to a full or nearly full condition which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the XQ, but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to ensure fairness between cores, or to delay a core's dirty eviction when the address conflicts with incoming external snoops. | EventSel=31H UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| CPU_CLK_UNHALTED.THREAD | Counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. This event uses fixed counter 1. You cannot collect a PEBs record for this event. | IA32_FIXED_CTR1 Fixed |
| CYCLES_DIV_BUSY.ALL | Counts core cycles if either divide unit is busy. | EventSel=CDH UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| CYCLES_DIV_BUSY.FPDIV | Counts core cycles the floating point divide unit is busy. | EventSel=CDH UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| CYCLES_DIV_BUSY.IDIV | Counts core cycles the integer divide unit is busy. | EventSel=CDH UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| DECODE_RESTRICTION.PREDECODE_WRONG | Counts the number of times the prediction (from the predecode cache) for instruction length is incorrect. | EventSel=E9H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| DL1.DIRTY_EVICTION | Counts when a modified (dirty) cache line is evicted from the data L1 cache and needs to be written back to memory. No count will occur if the evicted line is clean, and hence does not require a writeback. | EventSel=51H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| FETCH_STALL.ALL | Counts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events. | EventSel=86H UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| FETCH_STALL.ICACHE_FILL_PENDING_CYCLES | Counts cycles that fetch is stalled due to an outstanding ICache miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ICache miss. Note: this event is not the same as the total number of cycles spent retrieving instruction cache lines from the memory hierarchy. | EventSel=86H UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| FETCH_STALL.ITLB_FILL_PENDING_CYCLES | Counts cycles that fetch is stalled due to an outstanding ITLB miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ITLB miss. Note: this event is not the same as page walk cycles to retrieve an instruction translation. | EventSel=86H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| HW_INTERRUPTS.MASKED | Counts the number of core cycles during which interrupts are masked (disabled). Increments by 1 each core cycle that EFLAGS.IF is 0, regardless of whether interrupts are pending or not. | EventSel=CBH UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| HW_INTERRUPTS.PENDING_AND_MASKED | Counts core cycles during which there are pending interrupts, but interrupts are masked (EFLAGS.IF = 0). | EventSel=CBH UMask=04H Counter=0,1,2,3 PEBS:[Counter=0] |
| HW_INTERRUPTS.RECEIVED | Counts hardware interrupts received by the processor. | EventSel=CBH UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| ICACHE.ACCESSES | Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line. The event strives to count on a cache line basis, so that multiple fetches to a single cache line count as one ICACHE.ACCESS. Specifically, the event counts when accesses from straight line code crosses the cache line boundary, or when a branch target is to a new line. This event counts differently than Intel processors based on Silvermont microarchitecture. | EventSel=80H UMask=03H Counter=0,1,2,3 PEBS:[Counter=0] |
| ICACHE.HIT | Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line and that cache line is in the ICache (hit). The event strives to count on a cache line basis, so that multiple accesses which hit in a single cache line count as one ICACHE.HIT. Specifically, the event counts when straight line code crosses the cache line boundary, or when a branch target is to a new line, and that cache line is in the ICache. This event counts differently than Intel processors based on Silvermont microarchitecture. | EventSel=80H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| ICACHE.MISSES | Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line and that cache line is not in the ICache (miss). The event strives to count on a cache line basis, so that multiple accesses which miss in a single cache line count as one ICACHE.MISS. Specifically, the event counts when straight line code crosses the cache line boundary, or when a branch target is to a new line, and that cache line is not in the ICache. This event counts differently than Intel processors based on Silvermont microarchitecture. | EventSel=80H UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| ISSUE_SLOTS_NOT_CONSUMED.ANY | Counts the number of issue slots per core cycle that were not consumed by the backend due to either a full resource in the backend (RESOURCE_FULL) or due to the processor recovering from some event (RECOVERY). | EventSel=CAH UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| ISSUE_SLOTS_NOT_CONSUMED.RECOVERY | Counts the number of issue slots per core cycle that were not consumed by the backend because allocation is stalled waiting for a mispredicted jump to retire or other branch-like conditions (e.g. the event is relevant during certain microcode flows). Counts all issue slots blocked while within this window including slots where uops were not available in the Instruction Queue. | EventSel=CAH UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| ISSUE_SLOTS_NOT_CONSUMED.RESOURCE_FULL | Counts the number of issue slots per core cycle that were not consumed because of a full resource in the backend. Including but not limited to resources such as the Re-order Buffer (ROB), reservation stations (RS), load/store buffers, physical registers, or any other needed machine resource that is currently unavailable. Note that uops must be available for consumption in order for this event to fire. If a uop is not available (Instruction Queue is empty), this event will not count. | EventSel=CAH UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| ITLB.MISS | Counts the number of times the machine was unable to find a translation in the Instruction Translation Lookaside Buffer (ITLB) for a linear address of an instruction fetch. It counts when new translation are filled into the ITLB. The event is speculative in nature, but will not count translations (page walks) that are begun and not finished, or translations that are finished but not filled into the ITLB. | EventSel=81H UMask=04H Counter=0,1,2,3 PEBS:[Counter=0] |
| L2_REJECT_XQ.ALL | Counts the number of demand and prefetch transactions that the L2 XQ rejects due to a full or near full condition which likely indicates back pressure from the intra-die interconnect (IDI) fabric. The XQ may reject transactions from the L2Q (non-cacheable requests), L2 misses and L2 write-back victims. | EventSel=30H UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| LD_BLOCKS.4K_ALIAS | Counts loads that block because their address modulo 4K matches a pending store. | EventSel=03H UMask=04H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| LD_BLOCKS.ALL_BLOCK | Counts anytime a load that retires is blocked for any reason. | EventSel=03H UMask=10H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| LD_BLOCKS.DATA_UNKNOWN | Counts a load blocked from using a store forward, but did not occur because the store data was not available at the right time. The forward might occur subsequently when the data is available. | EventSel=03H UMask=01H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| LD_BLOCKS.STORE_FORWARD | Counts a load blocked from using a store forward because of an address/size mismatch, only one of the loads blocked from each store will be counted. | EventSel=03H UMask=02H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| LD_BLOCKS.UTLB_MISS | Counts loads blocked because they are unable to find their physical address in the micro TLB (UTLB). | EventSel=03H UMask=08H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| MACHINE_CLEARS.ALL | Counts machine clears for any reason. | EventSel=C3H UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| MACHINE_CLEARS.DISAMBIGUATION | Counts machine clears due to memory disambiguation. Memory disambiguation happens when a load which has been issued conflicts with a previous unretired store in the pipeline whose address was not known at issue time, but is later resolved to be the same as the load address. | EventSel=C3H UMask=08H Counter=0,1,2,3 PEBS:[Counter=0] |
| MACHINE_CLEARS.FP_ASSIST | Counts machine clears due to floating point (FP) operations needing assists. For instance, if the result was a floating point denormal, the hardware clears the pipeline and reissues uops to produce the correct IEEE compliant denormal result. | EventSel=C3H UMask=04H Counter=0,1,2,3 PEBS:[Counter=0] |
| MACHINE_CLEARS.MEMORY_ORDERING | Counts machine clears due to memory ordering issues. This occurs when a snoop request happens and the machine is uncertain if memory ordering will be preserved as another core is in the process of modifying the data. | EventSel=C3H UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| MACHINE_CLEARS.SMC | Counts the number of times that the processor detects that a program is writing to a code section and has to perform a machine clear because of that modification. Self-modifying code (SMC) causes a severe penalty in all Intel® architecture processors. | EventSel=C3H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| MEM_LOAD_UOPS_RETIRED.DRAM_HIT | Counts memory load uops retired where the data is retrieved from DRAM. Event is counted at retirement, so the speculative loads are ignored. A memory load can hit (or miss) the L1 cache, hit (or miss) the L2 cache, hit DRAM, hit in the WCB or receive a HITM response. | EventSel=D1H UMask=80H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_LOAD_UOPS_RETIRED.HITM | Counts load uops retired where the cache line containing the data was in the modified state of another core or modules cache (HITM). More specifically, this means that when the load address was checked by other caching agents (typically another processor) in the system, one of those caching agents indicated that they had a dirty copy of the data. Loads that obtain a HITM response incur greater latency than most is typical for a load. In addition, since HITM indicates that some other processor had this data in its cache, it implies that the data was shared between processors, or potentially was a lock or semaphore value. This event is useful for locating sharing, false sharing, and contended locks. | EventSel=D1H UMask=20H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_LOAD_UOPS_RETIRED.L1_HIT | Counts load uops retired that hit the L1 data cache. | EventSel=D1H UMask=01H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_LOAD_UOPS_RETIRED.L1_MISS | Counts load uops retired that miss the L1 data cache. | EventSel=D1H UMask=08H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_LOAD_UOPS_RETIRED.L2_HIT | Counts load uops retired that hit in the L2 cache. | EventSel=D1H UMask=02H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_LOAD_UOPS_RETIRED.L2_MISS | Counts load uops retired that miss in the L2 cache. | EventSel=D1H UMask=10H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_LOAD_UOPS_RETIRED.WCB_HIT | Counts memory load uops retired where the data is retrieved from the WCB (or fill buffer), indicating that the load found its data while that data was in the process of being brought into the L1 cache. Typically a load will receive this indication when some other load or prefetch missed the L1 cache and was in the process of retrieving the cache line containing the data, but that process had not yet finished (and written the data back to the cache). For example, consider load X and Y, both referencing the same cache line that is not in the L1 cache. If load X misses cache first, it obtains and WCB (or fill buffer) and begins the process of requesting the data. When load Y requests the data, it will either hit the WCB, or the L1 cache, depending on exactly what time the request to Y occurs. | EventSel=D1H UMask=40H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.ALL | Counts the number of memory uops retired that is either a loads or a store or both. | EventSel=D0H UMask=83H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.ALL_LOADS | Counts the number of load uops retired. | EventSel=D0H UMask=81H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.ALL_STORES | Counts the number of store uops retired. | EventSel=D0H UMask=82H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.DTLB_MISS | Counts uops retired that had a DTLB miss on load, store or either. Note that when two distinct memory operations to the same page miss the DTLB, only one of them will be recorded as a DTLB miss. | EventSel=D0H UMask=13H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.DTLB_MISS_LOADS | Counts load uops retired that caused a DTLB miss. | EventSel=D0H UMask=11H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.DTLB_MISS_STORES | Counts store uops retired that caused a DTLB miss. | EventSel=D0H UMask=12H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.LOCK_LOADS | Counts locked memory uops retired. This includes "regular" locks and bus locks. (To specifically count bus locks only, see the Offcore response event.) A locked access is one with a lock prefix, or an exchange to memory. See the SDM for a complete description of which memory load accesses are locks. | EventSel=D0H UMask=21H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.SPLIT | Counts memory uops retired where the data requested spans a 64 byte cache line boundary. | EventSel=D0H UMask=43H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.SPLIT_LOADS | Counts load uops retired where the data requested spans a 64 byte cache line boundary. | EventSel=D0H UMask=41H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MEM_UOPS_RETIRED.SPLIT_STORES | Counts store uops retired where the data requested spans a 64 byte cache line boundary. | EventSel=D0H UMask=42H Counter=0,1,2,3 PEBS:[PreciseEventingIP, DataLinearAddress, Counter=0] |
| MISALIGN_MEM_REF.LOAD_PAGE_SPLIT | Counts when a memory load of a uop spans a page boundary (a split) is retired. | EventSel=13H UMask=02H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| MISALIGN_MEM_REF.STORE_PAGE_SPLIT | Counts when a memory store of a uop spans a page boundary (a split) is retired. | EventSel=13H UMask=04H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| MS_DECODED.MS_ENTRY | Counts the number of times the Microcode Sequencer (MS) starts a flow of uops from the MSROM. It does not count every time a uop is read from the MSROM. The most common case that this counts is when a micro-coded instruction is encountered by the front end of the machine. Other cases include when an instruction encounters a fault, trap, or microcode assist of any sort that initiates a flow of uops. The event will count MS startups for uops that are speculative, and subsequently cleared by branch mispredict or a machine clear. | EventSel=E7H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| PAGE_WALKS.CYCLES | Counts every core cycle a page-walk is in progress due to either a data memory operation or an instruction fetch. | EventSel=05H UMask=03H Counter=0,1,2,3 PEBS:[Counter=0] |
| PAGE_WALKS.D_SIDE_CYCLES | Counts every core cycle when a Data-side (walks due to a data operation) page walk is in progress. | EventSel=05H UMask=01H Counter=0,1,2,3 PEBS:[Counter=0] |
| PAGE_WALKS.I_SIDE_CYCLES | Counts every core cycle when a Instruction-side (walks due to an instruction fetch) page walk is in progress. | EventSel=05H UMask=02H Counter=0,1,2,3 PEBS:[Counter=0] |
| UOPS_ISSUED.ANY | Counts uops issued by the front end and allocated into the back end of the machine. This event counts uops that retire as well as uops that were speculatively executed but didn't retire. The sort of speculative uops that might be counted includes, but is not limited to those uops issued in the shadow of a miss-predicted branch, those uops that are inserted during an assist (such as for a denormal floating point result), and (previously allocated) uops that might be canceled during a machine clear. | EventSel=0EH UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| UOPS_NOT_DELIVERED.ANY | This event used to measure front-end inefficiencies. I.e. when front-end of the machine is not delivering uops to the back-end and the back-end has is not stalled. This event can be used to identify if the machine is truly front-end bound. When this event occurs, it is an indication that the front-end of the machine is operating at less than its theoretical peak performance. Background: We can think of the processor pipeline as being divided into 2 broader parts: Front-end and Back-end. Front-end is responsible for fetching the instruction, decoding into uops in machine understandable format and putting them into a uop queue to be consumed by back end. The back-end then takes these uops, allocates the required resources. When all resources are ready, uops are executed. If the back-end is not ready to accept uops from the front-end, then we do not want to count these as front-end bottlenecks. However, whenever we have bottlenecks in the back-end, we will have allocation unit stalls and eventually forcing the front-end to wait until the back-end is ready to receive more uops. This event counts only when back-end is requesting more uops and front-end is not able to provide them. When 3 uops are requested and no uops are delivered, the event counts 3. When 3 are requested, and only 1 is delivered, the event counts 2. When only 2 are delivered, the event counts 1. Alternatively stated, the event will not count if 3 uops are delivered, or if the back end is stalled and not requesting any uops at all. Counts indicate missed opportunities for the front-end to deliver a uop to the back end. Some examples of conditions that cause front-end efficiencies are: ICache misses, ITLB misses, and decoder restrictions that limit the front-end bandwidth. Known Issues: Some uops require multiple allocation slots. These uops will not be charged as a front end 'not delivered' opportunity, and will be regarded as a back end problem. For example, the INC instruction has one uop that requires 2 issue slots. A stream of INC instructions will not count as UOPS_NOT_DELIVERED, even though only one instruction can be issued per clock. The low uop issue rate for a stream of INC instructions is considered to be a back end issue. | EventSel=9CH UMask=00H Counter=0,1,2,3 PEBS:[Counter=0] |
| UOPS_RETIRED.ANY | Counts uops which retired. | EventSel=C2H UMask=00H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| UOPS_RETIRED.FPDIV | Counts the number of floating point divide uops retired. | EventSel=C2H UMask=08H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| UOPS_RETIRED.IDIV | Counts the number of integer divide uops retired. | EventSel=C2H UMask=10H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| UOPS_RETIRED.MS | Counts uops retired that are from the complex flows issued by the micro-sequencer (MS). Counts both the uops from a micro-coded instruction, and the uops that might be generated from a micro-coded assist. | EventSel=C2H UMask=01H Counter=0,1,2,3 PEBS:[PreciseEventingIP, Counter=0] |
| UNCORE | ||
| OFFCORE | ||
| OFFCORE_RESPONSE:request=ANY_READ: response=L2_MISS.ANY | Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch)miss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=36000032B7H |
| OFFCORE_RESPONSE:request=ANY_READ: response=L2_MISS.HITM_OTHER_CORE | Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch)miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=10000032B7H |
| OFFCORE_RESPONSE:request=ANY_READ: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch)miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=4000032B7H |
| OFFCORE_RESPONSE:request=ANY_READ: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch)true miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=2000032B7H |
| OFFCORE_RESPONSE:request=ANY_READ: response=L2_HIT | Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch)hit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=432B7H |
| OFFCORE_RESPONSE:request=ANY_RFO: response=L2_MISS.ANY | Counts reads for ownership (RFO) requests (demand & prefetch)miss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000022H |
| OFFCORE_RESPONSE:request=ANY_RFO: response=L2_MISS.HITM_OTHER_CORE | Counts reads for ownership (RFO) requests (demand & prefetch)miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000000022H |
| OFFCORE_RESPONSE:request=ANY_RFO: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts reads for ownership (RFO) requests (demand & prefetch)miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000022H |
| OFFCORE_RESPONSE:request=ANY_RFO: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts reads for ownership (RFO) requests (demand & prefetch)true miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000022H |
| OFFCORE_RESPONSE:request=ANY_RFO: response=L2_HIT | Counts reads for ownership (RFO) requests (demand & prefetch)hit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40022H |
| OFFCORE_RESPONSE:request=ANY_DATA_RD: response=L2_MISS.ANY | Counts data reads (demand & prefetch)miss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600003091H |
| OFFCORE_RESPONSE:request=ANY_DATA_RD: response=L2_MISS.HITM_OTHER_CORE | Counts data reads (demand & prefetch)miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000003091H |
| OFFCORE_RESPONSE:request=ANY_DATA_RD: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts data reads (demand & prefetch)miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400003091H |
| OFFCORE_RESPONSE:request=ANY_DATA_RD: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts data reads (demand & prefetch)true miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200003091H |
| OFFCORE_RESPONSE:request=ANY_DATA_RD: response=L2_HIT | Counts data reads (demand & prefetch)hit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=43091H |
| OFFCORE_RESPONSE:request=ANY_PF_DATA_RD: response=L2_MISS.ANY | Counts data reads generated by L1 or L2 prefetchersmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600003010H |
| OFFCORE_RESPONSE:request=ANY_PF_DATA_RD: response=L2_MISS.HITM_OTHER_CORE | Counts data reads generated by L1 or L2 prefetchersmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000003010H |
| OFFCORE_RESPONSE:request=ANY_PF_DATA_RD: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts data reads generated by L1 or L2 prefetchersmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400003010H |
| OFFCORE_RESPONSE:request=ANY_PF_DATA_RD: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts data reads generated by L1 or L2 prefetcherstrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200003010H |
| OFFCORE_RESPONSE:request=ANY_PF_DATA_RD: response=L2_HIT | Counts data reads generated by L1 or L2 prefetchershit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=43010H |
| OFFCORE_RESPONSE:request=ANY_REQUEST: response=L2_MISS.HITM_OTHER_CORE | Counts requests to the uncore subsystemmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000008000H |
| OFFCORE_RESPONSE:request=ANY_REQUEST: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts requests to the uncore subsystemmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400008000H |
| OFFCORE_RESPONSE:request=ANY_REQUEST: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts requests to the uncore subsystemtrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200008000H |
| OFFCORE_RESPONSE:request=ANY_REQUEST: response=L2_HIT | Counts requests to the uncore subsystemhit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=48000H |
| OFFCORE_RESPONSE:request=ANY_REQUEST: response=ANY_RESPONSE | Counts requests to the uncore subsystemhave any transaction responses from the uncore subsystem. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=18000H |
| OFFCORE_RESPONSE:request=STREAMING_STORES: response=L2_MISS.ANY | Counts any data writes to uncacheable write combining (USWC) memory regionmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600004800H |
| OFFCORE_RESPONSE:request=STREAMING_STORES: response=L2_HIT | Counts any data writes to uncacheable write combining (USWC) memory regionhit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=44800H |
| OFFCORE_RESPONSE:request=PARTIAL_STREAMING_STORES: response=L2_MISS.ANY | Counts partial cache line data writes to uncacheable write combining (USWC) memory regionmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600004000H |
| OFFCORE_RESPONSE:request=PARTIAL_STREAMING_STORES: response=L2_MISS.HITM_OTHER_CORE | Counts partial cache line data writes to uncacheable write combining (USWC) memory regionmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000004000H |
| OFFCORE_RESPONSE:request=PARTIAL_STREAMING_STORES: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts partial cache line data writes to uncacheable write combining (USWC) memory regionmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400004000H |
| OFFCORE_RESPONSE:request=PARTIAL_STREAMING_STORES: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts partial cache line data writes to uncacheable write combining (USWC) memory regiontrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200004000H |
| OFFCORE_RESPONSE:request=PARTIAL_STREAMING_STORES: response=L2_HIT | Counts partial cache line data writes to uncacheable write combining (USWC) memory regionhit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=44000H |
| OFFCORE_RESPONSE:request=PF_L1_DATA_RD: response=L2_MISS.ANY | Counts data cache line reads generated by hardware L1 data cache prefetchermiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600002000H |
| OFFCORE_RESPONSE:request=PF_L1_DATA_RD: response=L2_MISS.HITM_OTHER_CORE | Counts data cache line reads generated by hardware L1 data cache prefetchermiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000002000H |
| OFFCORE_RESPONSE:request=PF_L1_DATA_RD: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts data cache line reads generated by hardware L1 data cache prefetchermiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400002000H |
| OFFCORE_RESPONSE:request=PF_L1_DATA_RD: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts data cache line reads generated by hardware L1 data cache prefetchertrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200002000H |
| OFFCORE_RESPONSE:request=PF_L1_DATA_RD: response=L2_HIT | Counts data cache line reads generated by hardware L1 data cache prefetcherhit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=42000H |
| OFFCORE_RESPONSE:request=SW_PREFETCH: response=L2_MISS.ANY | Counts data cache lines requests by software prefetch instructionsmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600001000H |
| OFFCORE_RESPONSE:request=SW_PREFETCH: response=L2_MISS.HITM_OTHER_CORE | Counts data cache lines requests by software prefetch instructionsmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000001000H |
| OFFCORE_RESPONSE:request=SW_PREFETCH: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts data cache lines requests by software prefetch instructionsmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400001000H |
| OFFCORE_RESPONSE:request=SW_PREFETCH: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts data cache lines requests by software prefetch instructionstrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200001000H |
| OFFCORE_RESPONSE:request=SW_PREFETCH: response=L2_HIT | Counts data cache lines requests by software prefetch instructionshit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=41000H |
| OFFCORE_RESPONSE:request=FULL_STREAMING_STORES: response=L2_MISS.ANY | Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writesmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000800H |
| OFFCORE_RESPONSE:request=FULL_STREAMING_STORES: response=L2_MISS.HITM_OTHER_CORE | Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writesmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000000800H |
| OFFCORE_RESPONSE:request=FULL_STREAMING_STORES: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writesmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000800H |
| OFFCORE_RESPONSE:request=FULL_STREAMING_STORES: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writestrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000800H |
| OFFCORE_RESPONSE:request=FULL_STREAMING_STORES: response=L2_HIT | Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writeshit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40800H |
| OFFCORE_RESPONSE:request=BUS_LOCKS: response=ANY_RESPONSE | Counts bus lock and split lock requestshave any transaction responses from the uncore subsystem. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=10400H |
| OFFCORE_RESPONSE:request=PARTIAL_WRITES: response=L2_MISS.ANY | Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memorymiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000100H |
| OFFCORE_RESPONSE:request=PARTIAL_READS: response=L2_MISS.ANY | Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory typesmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000080H |
| OFFCORE_RESPONSE:request=PF_L2_RFO: response=L2_MISS.ANY | Counts reads for ownership (RFO) requests generated by L2 prefetchermiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000020H |
| OFFCORE_RESPONSE:request=PF_L2_RFO: response=L2_MISS.HITM_OTHER_CORE | Counts reads for ownership (RFO) requests generated by L2 prefetchermiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000000020H |
| OFFCORE_RESPONSE:request=PF_L2_RFO: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts reads for ownership (RFO) requests generated by L2 prefetchermiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000020H |
| OFFCORE_RESPONSE:request=PF_L2_RFO: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts reads for ownership (RFO) requests generated by L2 prefetchertrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000020H |
| OFFCORE_RESPONSE:request=PF_L2_RFO: response=L2_HIT | Counts reads for ownership (RFO) requests generated by L2 prefetcherhit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40020H |
| OFFCORE_RESPONSE:request=PF_L2_DATA_RD: response=L2_MISS.ANY | Counts data cacheline reads generated by hardware L2 cache prefetchermiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000010H |
| OFFCORE_RESPONSE:request=PF_L2_DATA_RD: response=L2_MISS.HITM_OTHER_CORE | Counts data cacheline reads generated by hardware L2 cache prefetchermiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000000010H |
| OFFCORE_RESPONSE:request=PF_L2_DATA_RD: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts data cacheline reads generated by hardware L2 cache prefetchermiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000010H |
| OFFCORE_RESPONSE:request=PF_L2_DATA_RD: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts data cacheline reads generated by hardware L2 cache prefetchertrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000010H |
| OFFCORE_RESPONSE:request=PF_L2_DATA_RD: response=L2_HIT | Counts data cacheline reads generated by hardware L2 cache prefetcherhit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40010H |
| OFFCORE_RESPONSE:request=COREWB: response=L2_MISS.ANY | Counts the number of writeback transactions caused by L1 or L2 cache evictionsmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=3600000008H |
| OFFCORE_RESPONSE:request=COREWB: response=L2_MISS.HITM_OTHER_CORE | Counts the number of writeback transactions caused by L1 or L2 cache evictionsmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=1000000008H |
| OFFCORE_RESPONSE:request=COREWB: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts the number of writeback transactions caused by L1 or L2 cache evictionsmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=400000008H |
| OFFCORE_RESPONSE:request=COREWB: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts the number of writeback transactions caused by L1 or L2 cache evictionstrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=200000008H |
| OFFCORE_RESPONSE:request=COREWB: response=L2_HIT | Counts the number of writeback transactions caused by L1 or L2 cache evictionshit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=40008H |
| OFFCORE_RESPONSE:request=DEMAND_CODE_RD: response=OUTSTANDING | Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cacheoutstanding, per cycle, from the time of the L2 miss to when any response is received. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=4000000004H |
| OFFCORE_RESPONSE:request=DEMAND_CODE_RD: response=L2_MISS.ANY | Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cachemiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000004H |
| OFFCORE_RESPONSE:request=DEMAND_CODE_RD: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cachemiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000004H |
| OFFCORE_RESPONSE:request=DEMAND_CODE_RD: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cachetrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000004H |
| OFFCORE_RESPONSE:request=DEMAND_CODE_RD: response=L2_HIT | Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cachehit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40004H |
| OFFCORE_RESPONSE:request=DEMAND_RFO: response=OUTSTANDING | Counts demand reads for ownership (RFO) requests generated by a write to full data cache lineoutstanding, per cycle, from the time of the L2 miss to when any response is received. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=4000000002H |
| OFFCORE_RESPONSE:request=DEMAND_RFO: response=L2_MISS.ANY | Counts demand reads for ownership (RFO) requests generated by a write to full data cache linemiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000002H |
| OFFCORE_RESPONSE:request=DEMAND_RFO: response=L2_MISS.HITM_OTHER_CORE | Counts demand reads for ownership (RFO) requests generated by a write to full data cache linemiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000000002H |
| OFFCORE_RESPONSE:request=DEMAND_RFO: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts demand reads for ownership (RFO) requests generated by a write to full data cache linemiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000002H |
| OFFCORE_RESPONSE:request=DEMAND_RFO: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts demand reads for ownership (RFO) requests generated by a write to full data cache linetrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000002H |
| OFFCORE_RESPONSE:request=DEMAND_RFO: response=L2_HIT | Counts demand reads for ownership (RFO) requests generated by a write to full data cache linehit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40002H |
| OFFCORE_RESPONSE:request=DEMAND_DATA_RD: response=OUTSTANDING | Counts demand cacheable data reads of full cache linesoutstanding, per cycle, from the time of the L2 miss to when any response is received. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx(1A6H)=4000000001H |
| OFFCORE_RESPONSE:request=DEMAND_DATA_RD: response=L2_MISS.ANY | Counts demand cacheable data reads of full cache linesmiss the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=3600000001H |
| OFFCORE_RESPONSE:request=DEMAND_DATA_RD: response=L2_MISS.HITM_OTHER_CORE | Counts demand cacheable data reads of full cache linesmiss the L2 cache with a snoop hit in the other processor module, data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=1000000001H |
| OFFCORE_RESPONSE:request=DEMAND_DATA_RD: response=L2_MISS.HIT_OTHER_CORE_NO_FWD | Counts demand cacheable data reads of full cache linesmiss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=400000001H |
| OFFCORE_RESPONSE:request=DEMAND_DATA_RD: response=L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED | Counts demand cacheable data reads of full cache linestrue miss for the L2 cache with a snoop miss in the other processor module. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=200000001H |
| OFFCORE_RESPONSE:request=DEMAND_DATA_RD: response=L2_HIT | Counts demand cacheable data reads of full cache lineshit the L2 cache. | EventSel=(B7H) UMask={01H,02H} MSR_OFFCORE_RSPx{1A6H,1A7H}=40001H |